APPRENTICES PERCEPTION ON APPAREL FIT MADE WITH PATTERN DRAFTING AND FREE-HAND CUTTING METHODS

Authors

  • Dr. Dymphna Bakker-Edoh Koforidua Technical University
  • Dr. Johnson Kofi Kassah Ho Technical University
  • Gudila Ancelm Kereth Sokoine University of Agriculture, Morogoro
  • Dr. Elizabeth B. Oigo Kenyatta University
  • Prof. Keren G. Mburugu Kenyatta University

DOI:

https://doi.org/10.47604/ijsmp.1220
Abstract views: 248
PDF downloads: 337

Keywords:

Apprentices, Pattern Drafting, free-hand cutting, apparel fit

Abstract

Purpose: To assess the perceptions of apprentices on apparel fit made with pattern drafting and free-hand cutting methods.

Methodology: The study employed a cross-sectional descriptive survey was considered adequate for this study as it has the advantage of soliciting respondent’s views on the nature of the situation as it existed at the time of a study. The design is an efficient way of collecting information of a large group of people within a short time using questionnaires. The survey design was deemed appropriate for this study as it has the advantage of seeking the views of informal dressmakers and tailors on the use of pattern drafting and free-hand cutting in apparel construction. It allowed for the use of both quantitative and qualitative techniques in the study. This paved way for better understanding of a phenomenon under study. The use of these methods offered the opportunity to have in-depth information and also the weakness in one method is compensated for by the strength in another method.

Results: respondents agreed that using free-hand cutting method of apparel construction has certain limitations such as its inability to neither produce a perfect fit, takes care of fullness nor bring out the curves among others. Less than one third of the respondents were of the view that free-hand cutting contributed to perfect fit of apparel. Apprentices held a positive view about the use of pattern drafting as providing better fit of apparel as compared to free-hand cutting. It was summed that although free-hand cutting was the main training method used, some styles, because of their unique features, could only be cut with pattern and comes out better than free-hand cutting.

Unique Contribution to theory, practice and policy: The implication is that given the opportunity, training and necessary materials, these apprentices would start using more of pattern drafting than free-hand cutting. Therefore, the study recommended that the IDTA increase the opportunities of pattern drafting training which will lead to more production of better apparel fit.

The study recommended the IDTA should enact policy to incorporate pattern drafting and other methods of apparel construction into the training curriculum of apprentices to develop interest in the use of these methods right from the onset. Additionally, the study suggested future studies to focus on the factors that contribute to the dropouts during the apprenticeship period.

Downloads

Download data is not yet available.

Author Biographies

Dr. Dymphna Bakker-Edoh , Koforidua Technical University

Dept. of Fashion Design and Textiles

Dr. Johnson Kofi Kassah, Ho Technical University

Fashion design and Textiles Department

Gudila Ancelm Kereth, Sokoine University of Agriculture, Morogoro

Department of Food Technology, Nutrition & Consumer Sciences

Dr. Elizabeth B. Oigo, Kenyatta University

Department of Fashion Design and Marketing

Prof. Keren G. Mburugu, Kenyatta University

Department of Fashion Design and Marketing

References

Ampong, V.O. (2011). Ghana’s textile/garment industry. Industrial Development and Investment Division, Ministry of Trade and Industry, Ghana.

Anokye, A., & Afraine, S. K. (2014). Apprenticeship training system in Ghana: Processes, institutional dynamics and challenges. Journal of Education and Practice, 5 (7), 130 -140.

Biney-Aidoo, V., & Antiaye, E. (2013). Assessing the construction capacity of the apparel industry in Ghana in relation to AGOA condition. African Journal of Interdisciplinary Studies, 6 (1), 22-32.

Biney-Aidoo, V., Anyiaye, E., & Oppong, J. A. (2013). An assessment of apprenticeship systems as a means of acquiring sewing skills in Ghana. Developing Countries Studies, 3(11), 2224-2230.

Boakye, K. (2010). Challenges facing the small-scale textile and apparel industry in Ghana. Unpublished MSc Thesis. KNUST: Kumasi, Ghana.

Creswell, J. W. (2009). Designing and conducting mixed methods research. Thousand Oak, CA: Sage Publication

Dove, T. (2016). Stretch to fit-made to fit. International Journal of Fashion Design, Technology and Education, 9(2), 115-129.

Efajemue, O. O., & Lily, G. (2011). Analysis of adult female clothing made with adapted patterns and free-hand cutting: constrains and prospects. Proceedings of the First International Technology, Education and Environmental Conference, September 08, Omoku, Nigeria.

Eze, T. I., & Okorafor, O. A. (2012). Trends in technical, vocational education and training for improving the Nigerian workforce. Ebonyi Vocational and Technology Education Journal. 1(1), 107-115.

Filipiak, E. (2007). Vocational training in the informal sector: The outcomes of a field survey in seven African countries. A PowerPoint presentation prepared by the Research Department, Agency Francaise de Development, Paris.

Foster, P., & Adamtey, S. (2009). A manual for free-hand cutting of apparel. Accra: Asante and Hittscher Printing Press.

Foster, P., & Ampong, I. (2012). Pattern cutting skills in small apparel industries and teacher education universities in Ghana. International Journal of Vocational and Technical Education, 4(2), 14-24.

Fuller, A., & Unwin, L. (2012). Gender segregation, apprenticeship, and the raising of the participation age in England: Are young women at a disadvantage? Centre for Learning and Life Chances in Knowledge Economies and Societies. Institutes of Education, University of London.

Haan, H. C. (2006). Training for work in the informal micro‐enterprise sector: fresh evidence from sub‐Sahara Africa. Unesco‐Unevoc, Springer, The Netherlands.

Imirhe, T. (2004). The PSI on garment and textiles takes off. The Corporate Guardian, Blackgold Publications London, June- September, 2004, 79-80.

Johanson, R. K., & Adams, A. V. (2004). Skills development in Sub-Saharan Africa.World Bank Regional and Sector Studies. Washington, DC: World Bank.

Marangozov, R., Bates, P., Martin, R., Oakley, J., Sigala, M., & Cox, A. (2009). Research to shape critical mass pilots to address under-representation in apprenticeships. IES.

McIntosh, S. (2007). A cost-benefit analysis of apprenticeships and other vocational qualifications. Department of Economics, University of Sheffield and DfES

Mugenda, G.A. (2008). Social science research: Theory and principles. Nairobi, Kenya: Applied Research and Training Services.

Obinnim, E., & Pongo, N. A. (2015a). The significance of flat pattern making in fashion designing. International Journal of Innovative Research in Science, Engineering and Technology, 4(4), 1850-1857.

Obinnim, E., & Pongo, N. A. (2015a). The significance of flat pattern making in fashion designing. International Journal of Innovative Research in Science, Engineering and Technology, 4(4), 1850-1857.

Pongo, N.A., Effah, R., Osei-Owusu, B., Obinnim, E., & Sam, F.K. (2015). The impact of TVET on Ghana’s Socio-Economic development: A case study of ICCES TVET skills in two regions in Ghana. American International Journal of Contemporary Research, 4 (1) 185-191.

Steenekamp, S., & Singh, M. (2012). Recognition and validation of non-formal and informal learning, and NQFs:Critical levers for lifelong learning and sustainable skills development. Comparative analysis of six African countries. Paper prepared for the ADEA Triennial 13–17 February 2012, Ouagadougou, Burkina Faso. Hamburg, UIL.

Uwameiye, R., & Iyama, E. (2010). Training methodology used by the Nigerian indigenous apprenticeship system. Retrieved on May 20, 2015 from http//ww.iiz-dvv.de/index.php?article_id=402&clang=1

Uwameiye, R., & Iyama, E. (2010). Training methodology used by the Nigerian indigenous apprenticeship system. Retrieved on May 20, 2015 from http//ww.iiz-dvv.de/index.php?article_id=402&clang=1

Wallace, S. T., & Choi, T. (2011). Challenges in apparel construction and control. Construction Planning and Control, 22 (3), 209-220.

Downloads

Published

2021-02-19

How to Cite

Bakker-Edoh , D. D. ., Kofi Kassah, D. J. ., Ancelm Kereth, G. ., B. Oigo, D. E. ., & G. Mburugu, P. K. . (2021). APPRENTICES PERCEPTION ON APPAREL FIT MADE WITH PATTERN DRAFTING AND FREE-HAND CUTTING METHODS. International Journal of Strategic Marketing Practice, 3(1), 1–11. https://doi.org/10.47604/ijsmp.1220

Issue

Section

Articles